Sorry, this entry is only available in French.
We frequently hear/read about people complaining about an excessive latency due to a too accurate audio interface of the X brand or to shoddy drivers of the Y brand, or because we use a particular kind of computer and not another one and we have to change everything and… STOP!
Several points require to be clarified. We’ll present you the factors that influence your projects latency.
What is audio latency?
Technically, it’s the period of time between the moment a sound is produced by an instrument and the moment it comes out of the speakers after being processed by the recording system.
Here is the path: instrument -> audio interface -> computer -> audio interface -> speakers.
Example: I play an A with my guitar which is directly connected to my audio interface. How much time does it take before I hear this A note coming out of my speakers?
For a successful recording, the sound played by the musician(s) must be retransmitted in “real time”. If there is a too significant latency, we hear the played note delayed, like an echo. This is VERY difficult to play with and doesn’t make for a good performance. This situation can also sometimes be observed while sending a MIDI signal (from a keyboard for example) that triggers a function of a virtual instrument. Thus, it’s very important, at least for recording or composition, to be able to work with a low latency, not to hear this echo.
The sound produced by an instrument goes through a number of stages before coming back to our ears: even if it seems instantaneous there is always a slight latency.
Extract from the article “The truth about Digital Audio Latency” published by Presonus (full article, click here).
HOW TO ACT ON AUDIO LATENCY?
The elements influencing latency are:
- The interface and (especially) its drivers
- Your audio interface configuration
- The technology of the connection
- The operating system optimization
- The quality of your workstation
- The plugins you use
- Your DAW
Audio interface and drivers
It’s obviously a crucial point. Some audio interfaces manufacturers are better than others. RME, for example, has a well-deserved reputation because of the stability and the excellent performances of its drivers. On the contrary, Presonus has produced less efficient interfaces (see for example this test of AudioFanzine) although they use a very recent technology (USB 3.0).
A driver is a computer program which enables the operating system to interact with a peripheral, in this case with your sound card. Thus, the driver’s quality has a significant impact on the sound treatment performances and especially on the latency and the workstation stability.
Configuration of your audio interface
Two parameters are absolutely crucial: the sample rate and the buffer size.
Buffer size: it’s a temporary storage space where the data that will be treated by your processor is saved. The processor doesn’t process the information continuously: it treats successive blocks. It also sends at regular intervals a small amount of data for them to be processed by your audio interface. Since it’s a real-time process, the processor can’t “stack” the blocks. It sends them regularly, otherwise it would interrupt the flow of data your sound card receives and would produce artifacts (glitch, cracking).
Result n°1: the smaller these blocks are, the quicker the processor and the better optimized your computer should be, so that the flow is not interrupted (cracks and pops). It’s not mandatory to reach the lowest latency possible : as long as it’s imperceptible to your ears, to record should be happening in good conditions.
Result n°2: if these blocks are large, the processor needs more time to process them which implies a higher latency, since more calculations are necessary to process this data.
Sample rate: It’s the number of “digital pictures” of the sound signal that your computer will take every second to restore the sound in the digital realm. For example, the CD standard is of 44.1kHz (that is 44 100 “sound pictures” per second). This is how we write the equivalent of analog audio flow down into the digital world.
Result n°1: the higher this parameter is, the better will be the quality and the size of the files (see the article about sample rate).
Result n°2: if you increase the number of “sound pictures” per second, your buffer memory will be filled faster, resulting in a latency reduction. However, the files to be processed are larger which could produce artifacts if your computer doesn’t have the necessary resources to process them.
A balance has to be found to allow your system to have a sufficiently low audio latency to record without cracks and other artifacts, while maintaining the desired audio quality.
This balance might be different depending on the projects and the production phases (writing, recording, editing, mixing or mastering).
For a more detailed explanation, I recommend you to watch this excellent video of Richard Ames.
There are many connection interfaces, and they all have their specific advantages and drawbacks. Here comes a list:
- USB 2.0/3.0
Of course, we are dealing with audio interfaces, not with audio interfacing. That’s why other standards such as AES, ADAT or MADI are not included in this list. We will treat them in another article.
Every existent technology has different specifications in terms of latency, and you would be better knowing before choosing one. I will address this point in an article entitled “Which connection standard choosing for your audio interface?” (online soon).
Quality of your digital audio workstation
Let us not be afraid of pushing open doors: the more powerful your computer is, the higher its processing capabilities and speed are. The matter here isn’t only your processor: a computer should have a balanced and harmonized configuration to function at its best. Thus, the best processor will be restrained in its performances when coupled only to a mechanical hard disk, for example.
All the components of the machine have to be taken into account:
- Storage mediums (SSDs and hard disks)
- Power supply
- Operating system
For example, it’s not appropriate to use hard disks for this kind of workstation, preference should be given to SSDs. It’s not necessarily essential to look for the largest quantity of RAM possible (editor note: my personal computer “only” have 8Gb and I don’t have any problem with that).
These various characteristics need to be adapted according to the use you make of your workstation: number of virtual instruments, average number of tracks, etc.
For passionate or professional producers, it’s better to choose audio and computing specialists (Pure Perception for example 😀 )
Operating system optimization
It’s a crucial point: the operating system (or OS) is at the very heart of the functioning of every digital production architecture. Doesn’t matter which one you use, its optimization depends on the proper functioning of all the other elements (drivers, DAW, plugins, etc).
You will find more information about that in a future article. However, here are some initial indications:
- Use a correctly set up antivirus
- Remove all the useless programs loaded on startup.
- Set up the advanced systems
- Remove the bloatwares
Some plugins can induce a supplementary latency if your computer isn’t performing/optimized enough. It’s a phenomenon sometimes observed with guitar or bass amplifier simulators (BIAS Amp, Waves GTR, etc) or with plugins that use heavy sample libraries (some Kontakt instruments, for example).
Note that it’s possible that even with a well-optimized computer and the proper resource to execute it, some plugins can remain unstable or create artifacts. Generally, it’s necessary to stop using this plugin. This case is very rare and I have, personally, never had to resort to such measures. It’s a situation in which we can end up with old plugins that are not no longer updated.
We are all using different DAWs for different reasons. Depending on your needs and on the performances of your workstation, it may be interesting to use a specific DAW.
For example, on a laptop, I often recommend Reaper because it is so light which liberates a lot of processing power.
On a desktop computer, there are many options, depending on your working habits. Lately, I have been going back and forth between Cubase Pro 8.5 and Reaper depending on the project and on what I wanted.
All the listed elements affect the audio latency, and obviously, a properly balanced configuration helps a lot. The most important is: a good computer, since everything else depends on it, then the drivers/audio cards and the DAWs.
Getting an adequate latency requires to pay attention to your whole installation, and to calibrate it in function of the projects you have to lead and the desired quality you want to reach.
Don’t hesitate to contact us if you need assistance with the configuration of your equipment or advices to optimize it.
#latenceaudio #interfaceaudio #stationdetravailaudionumérique #silentcomputer
Like many people, I learned the bases of recording and music production with Pro Tools. When Pro Tools LE 7.4 was edited by DigiDesign, with the Digi 003 of my friend Bruno and my MBox 2, I learned the basic functions of Pro Tools almost entirely by myself, catching up the evolutions through Pro Tools 8, 9, 10 and 11.
From a purely financial point of view, every update has been substantially costly, especially for a student. But to keep my work habits, I didn’t particularly look out for an alternative. Besides, to me, an update was a synonym of stability. How wrong was I !
From a technical point of view, except my quick try of Cubase, I didn’t have any benchmark. I had just heard about Sonar, Fruity Loops and Nuendo, but nothing concrete.
Finally, from a practical point of view, the “workflow” notion made no sense to me because I had always worked in the same environment and never wondered if it fitted me.
Comfort and good working habits are two important notions while using a sound sequencer: you need to be able to work freely without being held up in your creative process. Nonetheless, it seems interesting, even essential, to wonder if your tool is adequate to your work.
One day, I realised the only reason why I was using ProTools: my ignorance of any other DAW. I was paying for every update and bundle of software, from which I only used the Channel Strip, and not once did I even wonder if ProTools was the best fit for me. In essence, I only needed a few tools: a sequencer (ouch!), an equalizer and a compressor as well as my virtual instruments. There was no doubt: I was going to try other options!
First, I tried to transpose everything to FL Studio (a software I use for my electro projects) but it seemed to be suitable only for electronic music production (I mainly work on metal/rock/pop projects). I also tried Reason, Tracktion, Harrison Mixbus and others.
Finally, I tried Reaper from Cockos. It was the best compromise: a sober and customizable interface; just enough integrated effects; cross-platform compatibility; a great stability and a small computer space required. Moreover, it had a more than fair pricing policy.
All that for what conclusion? That Pro Tools is expensive and wrong? No. Clearly not. It’s like claiming that Windows is better than Mac OS X or vice versa. Or to say that a Ferrari is better than a Porsche. At the end, your sequencer is an instrument just like your guitar or your piano: you have to feel comfortable with it in all its dimensions to be able to easily leverage it and focus on your creativity. It also has to be adapted to your particular need (i.e.: FL Studio for an electro orientation, Reaper for a more general one).
I’ve found the right balance with Reaper (and FL Studio for the electro): I highly recommend you to try other DAWs to observe your habits from a different perspective and to potentially find new ways to work!
You should think about the cleaning of your computer from two perspectives: the hardware and the software. You will find below our advices to preserve your computer in the best shape possible.
Dust is the number-one enemy. Its accumulation, greatly diminishes your computer’s capacity to dissipate heat; thus raising the fans’ speed, thus your computer being noisier and attracting more dust; thus diminishing your computer’s heat-dissipating capacity; and so on.
There will always be some dust in a computer. Ours are designed to minimize this phenomenon as much as possible, notably by the presence of filters on the ventilation, but a real solution to fend off this doesn’t exist (yet).
Try to keep your workplace as clean as possible. If you clean regularly a quick dusting can suffice.
Be careful if you are using a vacuum directly in the computer: the connections can easily get caught in the suction hose which could damage the connectors.
The “software fouling” like dust is inevitable once you start using your computer (with or without connection to the internet). Hidden temporary files that are not removed, installing and uninstalling programs, updating your computer can leave unwanted data, register keys, etc.
To fix this, we are recommending you use these free programs in this specific order.
Caution: using these programs is absolutely not a cure-all and it will not get rid of more serious problems (virus, etc). It is mainly preventive measures and in case of serious problems, it may be necessary to use more complex and/or more complicated solutions (anti-virus scans, in-depths tweaks, reinstalling your operating system, etc).
This program will quickly clear your computer of many undesirable ad-softwares. It’s one of the most usefull tool to clean a PC we have seen in a few years..
After restarting the computer, you can use the next program.
This software clears off a lot of temporally files, being stored by internet browsers. Don’t hesitate to do it several times in a row.
In the “register” section, you can proceed to an important cleaning of all the possible traces that have been left by programs during (un)installations. Once again, don’t hesitate to repeat this operation several times.
This program is not always needed, but it helps to go further in the cleaning (or just to make sure) . You can just use it from time to time after you have done the first two. First, because the analysis can take quite some time. Secondly, the targeted elements aren’t necessary as frequent as those previously targeted.
These programs’ frequency of use depends on the way you are using your computer. Overall, the more you are using the internet, the more it will be useful to use these frequently, more so the first two programs.
The best solution is to adjust the frequency according to the results you get.
If you need more help to clean your computer, feel free to contact us !